PREBOND-HR Heat Resistant Aluminum Paint 6000C

Link Copied

Edit

Product Details

Dry Film Thickness

25-40 Um Microns DFT Per Coat

Drying Time

Touch Dry: 10 Minutes, Hard Dry: 06 Hour, Full Cure: 24 Hour

Flexibility

Passes OT Bend Test

Adhesion

Excellent (After Curing Heat)

Dry Heat Resistance

Excellent Up-to 600°C

Chemical Fumes Resistance

Excellent (without Cracking / Chipping Of Paint Film)

Salt Spray

Pass The Test (300 Hours After Curing Heat) 02 Coats

Method Of Application

Brush, Roller, Spray Or Dipping

Coverage

08-10 Sq. Mtr. Area Per Liter (single Coat)

Recommend Coats

Apply 02 Coats For Better Result

Surface Preparation

Clean The Surface Well By Using Wire-brush

Container Pot Life

08 Months (in Air Tight Container)

Packaging Type

20 Liters In Newly Printed Mild Steel Drum

PRODUCT DESCRIPATION:PREBOND-HR is a high-performance single-component ready-to-use high heat-resistant aluminum paint designed for high-heat, chemical fumes and corrosion resistance applications. It is formulated with silicone modified polymer and ultrafine aluminum pigment based with providing excellent protection up-to 600°C. This paint is DTM (Direct to Metal) and does not require any special techniques or primer before application.

No mixing errors or pot life issues making it problem-free to apply.
Protects metal surfaces from corrosion at continuous high temperatures up-to 600°C.
Provides excellent thermal insulation, reducing heat transfer and keeping surfaces cooler.
Additional properties of weather resistance along with water, chemical, moisture & UV resistance.
Suitable for various applications including chimneys, boilers, tubes, furnaces, duct collectors, pipelines,

tanks, mufflers, manifolds, exhausts, automotive silencers and heater baffles etc.

For, more any other technical details of the products & our services, please contact our technical representative

Looking for "PREBOND-HR Heat Resistant Aluminum Paint 6000C" ?

Litre